Have you ever seen the terminated Ethernet Cable using an "https://www.smartechcables.com/product-category/cable-accessories/connectors/">RJ45 connector? I am sure you do. Now with that terminated cable, you can connect it to a computer, router, hub, printer, or ethernet splitter as per your requirement.
Here the following things are under consideration before knowing “How to terminate Cat6 Ethernet Cable?” how to identify the wiring sequence of the terminated Bulk Ethernet Cable? The Ethernet cable is used for LAN and WAN setups and the connector on its ends is RJ45 (Registered Jack 45) which enables it to be used for networking — sending and receiving data.
In this article, let’s briefly discuss the Cat6 Plenum Ethernet Cable and how to terminate the Cat6 Ethernet Cable. The ethernet termination is a DIY method that will help you set up your network more easily. It might be needed in the future when a network technician is not accessible. Starting with a brief introduction to Category 6 Cable.
What Is Cat6 Ethernet Cable — Definition
The Institute of Electrical and Electronics Engineers (IEEE) has set different standards for ethernet speed as IEEE 802.3. The Cat6 plenum ethernet cable is a modern ethernet cable featuring high speed. The cable seems to have 4 twisted pairs even further tightly twisted throughout the cable’s length.
The plenum jacket is the outer jacket to prevent the cable from atmospheric temperature to stabilize the speed. The speed of the "https://www.smartechcables.com/product/cat6-solid-copper-plenum-1000ft-utp-ethernet-cable/">Cat6 plenum 1000ft cable is the same over 328ft the ideal length of an ethernet cable for installation. Ideal means it is recommended to use the cable below 328ft the longest length of the cable to use for installation.
The cable has internal spline plastic cross-skeleton material to avoid pair-to-pair crosstalk. Tight twisting and spline reduce the attenuation and entry of EMI. The conductor size of the Cat6 ethernet cable is 23 AWG which indicates the thickness of the conductor. The thicker the conductor the higher the data will be transferred from the cable. Cat6 plenum 1000ft has the highest bandwidth of 550 MHz which means the cable is likely to be used for fast ethernet applications.
All these specifications are associated with the right termination and follow the steps for terminating your Cat6. Cat6 termination is quite as simple and you can follow it with Cat5e cable or Cat6a cable. Before understanding Cat6 termination let’s find out its importance.
Why is Termination Important?
Ethernet having 8 conductors is likely to engage with the proper wiring standards as T568A and T568B has their separate color combinations to idealize the termination. Regarding the termination, the color code for termination is different for T568A and T568B. For T568A Color Code
- White-Green
- Green
- White-Orange
- Blue
- White-Blue
- Orange
- White-Brown
- Brown
For T568B Color Code
- White-Orange
- Orange
- White-Green
- Blue
- White-Blue
- Green
- White-Brown
- Brown
Some points show why termination is essential regarding the Cat6 Plenum Ethernet Cable. Using an RJ45 connector you can easily terminate the Cat6 plenum copper cable to make it feasible for
- Data Transmission Integrity
- Backward Compatibility
- Network Stability
- Safety
- Performance
- Gigabit Speed
How To Terminate Cat6 Ethernet Cable?
Follow this termination method for the Cat6 plenum 1000ft cable to make it useful and worth functioning. The tools you need to terminate the cable are scissors, a cable cutter, a pair of RJ45 connectors or more, a cable tester, a crimping tool, and the bulk Cat6 Ethernet Cable.
Step 1 — Cut the Required Length
The first step involves the proper cutting of the Cat6 Plenum Ethernet Cable. It is recommended to cut some extra inches for easy fittings. After that put the wire in the cable cutter and cut the jacket about 3 inches or more as per your convenience. Separate the cable jacket to naked the twisted pairs.
Step 2 — Alignment of Twisted Pairs
Now the twisted pairs of cat6 are visible untwist the pairs carefully. This is a very delicate process as the damage to the conductor will damage the speed. Straight all the conductors and once you have done so, cut the inner spline.
Step 3 — Align Wires According to Color Code
Once the conductors are straight sequence them according to the color code like T568B or A. Now cut some extra length of the conductors before penetrating it to the RJ45 connector. After cutting the extending length of the insert gently into the RJ45 connector apply pressure by holding the cable jacket.
Step 4 — Crimping the Cable
Now grab the Crimping tool for Ethernet Cables, insert the RJ45 connector, and apply gentle pressure. Once this procedure is done you can check the wire by pulling it out to check any loose connections. Repeat the process of the termination on the other end of the cable.
Step 5 — Testing the Connection
Now you have terminated the cat6 plenum 1000ft cable on both ends. Simply insert one end of the cable into the cable tester to check the wiring standards are aligned. Hurray! Your cable is now able to connect to any networking device.
Final Words
The most demanding wired networking cables are Cat5e or Cat6 Plenum due to gigabit speed. But when there is a need for performance and speed you only go for Cat6 Plenum solid copper cable.
The termination process of the Cat6 Ethernet Cable is quite simple. All you need to do is just look carefully for any damage to the conductor. If the conductor is damaged or kinked it will affect the speed and data transmission.
